[CEII-CD] CEII Civil 3D
Topic outline
- [CEII-CD] CEII Civil 3D
- Course Objective
- Course Learning Outcome
- Course Content
Course Content
Data Clean-up, Assessment, and Preparation of Existing Ground Condition
1. Introduction to Autodesk AutoCAD Civil 3D
1.1. Interface and commands
1.2. Drawing setting
1.2.1. Units
1.2.2. Scale
1.2.3. Coordinate system
1.2.4. Styles
1.3. Generating template and template installation
2. Clean-up Survey Drawing
2.1. Working with layers
2.2. Execute clean-up commands
2.3. Import cleaned survey data into AutoCAD Civil 3D template
3. Creating 3D Existing/Original Ground Surface
3.1. Creating surface from 2D AutoCAD TEXTS
3.2. Creating surface from 2D AutoCAD POINTS
3.3. Creating surface from 2D AutoCAD LINES / POLYLINES / CONTOURS
Basic Road and Highway Modeling
1. Alignment Design
1.1. Create and edit horizontal alignment
1.2. Alignment labeling
1.2.1. Control Plan
1.2.2. Fixed Interval Pegging (IP) Points
2. Superelevation Design
2.1. Generate superelevation
2.2. Superelevation input: Control Plan
3. Profile Design
3.1. Create existing ground profile
3.2. Create and edit proposed road profile
3.3. Profile input: Longitudinal Plan and Profile
4. Assembly Design (Autodesk Subassembly Composer)
4.1. Create typical cross section of simple road
4.2. Create typical cross section of road based on standard drawing
5. Corridor Design
5.1. Create and edit proposed corridor
6. Volume Calculation
6.1. Cut and fill volume
6.1.1. TIN Volume method
6.1.2. Cross section / Average End Area method
6.2. Generate volume report
7. Cross Section Detailing
7.1. Create multiple cross sections
7.2. Create section views
Grading, Parcel and Pipe Network
1. Grading
1.1. Create / edit feature line
1.1.1. Create new feature line
1.1.2. Create feature line from object / line / polyline
1.1.3. Edit feature line
1.2. Create / edit grading
2. Parcel
2.1. Create / edit parcel with different sub-division criteria
3. Gravity and Pressurized Pipe Network
3.1. Understanding part list and pressure pipe catalogue
3.2. Create / edit pipe network
3.2.1. Sanitary sewer
3.2.2. Sewerage
3.2.3. Drainage
3.2.4. Stormwater
3.3. Create / edit manhole schedule
3.4. Create / edit pressure pipe
3.5. Interface checking
3.6. Generating sections
Advance Road and Highway Modeling
1. Road and Highway Design
1.1. Modelling an intersection/junction
1.2. Modelling a roundabout
1.3. Modelling a road widening
2. Assembly Design
2.1. Create new subassemblies
2.1.1. Retaining wall
2.1.2. Opened / covered drain
2.1.3. Curb
3. Corridor Design
3.1. Add retaining wall with customized assembly into corridor
3.2. Add opened / covered drainage into corridor
3.3. Add curb into corridor
4. BIM Workflow Overview
4.1. Integration with Autodesk Infraworks
4.2. Integration with Autodesk Navisworks
4.3. Shared coordinate system with C3D / Revit
4.4. Object data labels for GIS data preparation
